Plaster Reinforcing Fabric

🔍
,

Plaster Reinforcing Fabric

Fibre glass Reinforcement solutions that are less costly and more effective than steel. High performance, full strength, alkali-resistant products will not rot, rust or corrode. They are also lightweight and easy to install and use. These innovative, superior alternatives to steel mesh are easy to work-with, will not rust or rot and provide increased strength in every cementitious application.

Fibre Glass Reinforcement Mesh is used for reinforcement of inside concrete floors and walls elimination of cracks during repair of thin concrete layers and other non-structural concrete applications in buildings.

Uses

  • To reinforce all types of plaster, applied externally or internally.
  • For load-bearing construction and general renovation work.
  • For repair work and general renovation application.
  • Preventing cracks in plastering.
  • As reinforcing base for gypsum or wooden surface

Installation:
Wet the surface thoroughly and apply a thin coat of plaster. Press the fabric gently with a trowel in the fresh plaster. Apply the final layer of plaster.

Categories: , Tag:

 

Advantage

  • High Alkali Resistant
  • Non Corrosive
  • Low Elongation
  • East to Install – No Hammering or Nailing
  • Excellent adhesion with all types of plaster.
Specification
Mesh Size 5×5 mm ± 0.5 mm Mesh Size 8×8 mm ± 0.5 mm
Weave Construction Warp : 5*2 per inch
Weft : 4.5 per inch		 Weave Construction Warp : 5*2 per inch
Weft : 4.5 per inch
Warp Yarn 134 Tex glass yarn Warp Yarn 134 Tex glass yarn
Weft Yarn 400 Tex glass roving Weft Yarn 400 Tex glass roving
Weave Type Leno Weave Type Leno
Thickness 0.38 ± 0.02 mm Thickness 0.38 ± 0.02 mm
Coating Alkali Resistant
(Tensile Strength retention
more than 50%)		 Coating Alkali Resistant
(Tensile Strength retention
more than 50%)
Finish Medium Hard Finish Medium Hard
Total gsm 160 ± 5% gsm Total gsm 80 ± 5% gsm
Width 1000 mm Width 1000 mm
Feather Edge Slit Edge Feather Edge Slit Edge
Length 50 M Roll Length 50 M Roll
Tensile Strength Warp 2400 N/5 CM  with
Elongation- 4.0%
Warp 2000 N/5 CM with
Elongation- 4.0%		 Tensile Strength Warp 1100 N/5 CM  with
Elongation- 3.8%
Warp 900 N/5 CM with
Elongation- 3.8%

Related products